Isuzu 1999 RODEO Workshop Manual page 350

15. Use the punch J–39209 to stake the rear companion
flange nut (3) at two spots.
16. Stake the front companion flange nut (2) at one spot.
NOTE: Be sure to confirm that there is no crack at the
staked portion of the flange nut after staking.
17. Install the O–ring (23) to the speedometer driven gear
bushing (22).
18. Install the driven gear to the speedometer driven gear
bushing (22).
19. Install the speedometer driven gear assembly to the
transfer rear cover.
20. Install the plate (21) to the transfer rear case and
tighten to the specified torque.
Torque: 15 N·m (11 lb ft)
21. Install the speedometer sensor and tighten to the
specified torque.
Torque: 27 N·m (20 lb ft)
266RS001
Legend
(20) Bolt
(21) Plate
(22) Bushing
266RW002
(23) O–ring
TRANSFER CASE 4D–15
225RW004