Front Speaker; Rear Speaker; Tweeter Assembly Removal/Installation - Isuzu 1999 RODEO Workshop Manual

ENTERTAINMENT
8C–6

Front Speaker

Removal
1. Disconnect the battery ground cable.
2. Pull the grille (1) to release the locks and then remove
it.
3. Remove four screws and disconnect the connector
(3) to remove the speaker (2).
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
Tweeter Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the front door trim pad (2).
f Refer to Front Window Regulator, Glass And Glass
Run in Body Structure section:
3. Remove the tweeter (1).
f Disconnect the connector.
Speaker
Installation
To install, follow the removal steps in the reverse order,
noting the following point:

Rear Speaker

Removal
890RX012
1. Disconnect the battery ground cable.
2. Remove the roof rear lining (1).
f Release the locks and clips.
3. Remove the speaker (2).
f Remove the four screws.
f Disconnect the connector (3).
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
635RW009
890RW019–1