Isuzu 1999 RODEO Workshop Manual page 1034

Inspection Procedure
Inspect in–tank fuel filter for tears, damage or evidence of
dirt derbies or water in the fuel. If any of these condition
exist, replace the in–tank fuel filter.
Installation Procedure
1. Insert the fuel pump assembly into fuel tank and place
them at its position.
RODEO X22SE 2.2L ENGINE DRIVEABILITY AND EMISSION
041RX003
041RX002
2. Using J–39763, twist fuel pump assembly clock wise
into the lock.
3. Install the fuel tank. Refer to Fuel Tank Installation
Procedure.
4. Install the fuel pump relay.
5. Connect the negative battery cable.
6E1–407
901RX036
041RX004