6E1–382 RODEO X22SE 2.2L ENGINE DRIVEABILITY AND EMISSION
5. Install the drive belt. Refer to Engine Mechanical
Section.
6. Install the top harness cover onto timing belt cover.
7. Connect electrical connector to the sensor and
securely lock it.
8. Install the spark plug cover.
9. Connect the negative battery cable.
Crankshaft Position (CKP)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the drive belt. Refer to Engine Mechanical
Section.
014RX005
3. Remove
mounting–bracket from engine. Refer to Engine
Mechanical Section.
4. Disconnect electrical connector from the sensor.
014RX004
Sensor
the
pwer
steering
014RX003
pump
and
014RX006