Ftp Commands; Ftp Server Commands; Display Ftp-Server; Display Ftp-User - H3C S6812 Series Command Reference Manual

FTP commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
FTP is not supported in FIPS mode.

FTP server commands

display ftp-server

Use display ftp-server to display FTP server configuration and status information.
Syntax
display ftp-server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display FTP server configuration and status information.
<Sysname> display ftp-server
FTP server is running.
User count:
Idle-timeout timer (in minutes):
Table 1 Command output
Field
User count
Idle-timeout timer (in minutes)
Related commands
ftp server enable
ftp timeout

display ftp-user

Use display ftp-user to display detailed information about online FTP users.
Syntax
display ftp-user
1
30
Description
Number of the current logged-in users.
If no packet is exchanged between the FTP server and client during
this period, the FTP connection is closed.
1