Ftp Server Configuration Example - H3C S9500 Series Operation Manual

Operation Manual – FTP and TFTP
H3C S9500 Series Routing Switches
Caution:
If the Flash Memory of the switch is not enough, you need to first delete the existing
programs in the Flash Memory and then upload the new ones.
When uploading a file, name the file in ASCII characters to ensure normal operation
of the system.
# Enter the authorized directory of the FTP server.
[ftp] cd switch
# Use the put command to upload the config.txt to the FTP server.
[ftp] put config.txt
# Use the get command to download the switch.app from the FTP server to the Flash
directory on the FTP server.
[ftp] get switch.app
# Use the quit command to release FTP connection and return to user view.
[ftp] quit
<H3C>
# Use the boot boot-loader command to specify the downloaded program as the
application at the next login and reboot the switch.
<H3C> boot boot-loader primary switch.app
<H3C> reboot

1.3.2 FTP Server Configuration Example

I. Network requirements
Switch serves as FTP server and the remote PC as FTP client. The configuration on
FTP server: Configure an FTP user named as switch, with password hello and with
read & write authority over the flash root directory on the PC. The IP address of a VLAN
interface on the switch is 1.1.1.1, and that of the PC is 2.2.2.2. The switch and PC are
reachable.
The switch application switch.app is stored on the PC. Using FTP, the PC can upload
the switch.app from the remote FTP server and download the config.txt from the FTP
server for backup purpose.
Chapter 1 FTP and TFTP Configuration
1-7