Table of Contents
Advertisement
DXS/DWS-3200 series CLI Reference Guide
boot system
The boot system Privileged EXEC mode command specifies the system image that the device loads at startup.
Syntax
boot system [unit unit] {image-1 | image-2}
Parameters
•
unit — Specifies the unit number. (Not relevant for a standalone device).
•
image-1 — Specifies image 1 as the system startup image.
•
image-2 — Specifies image 2 as the system startup image.
Default Configuration
If the unit number is unspecified, the default setting is the master unit number.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example
The following example loads the system image 1 at device startup.
Console# boot system image-1
Page 93
Advertisement
Table of Contents
