Displaying 802.1X Parameters - Avaya G250 Administration Manual

Enter set port dot1x supp-timeout, followed by the module and port number (or
●
range of ports) and a time period in seconds (0 to 65535), to set the
authenticator-to-supplicant retransmission timeout period (the time for the G250/G350 to
wait for a reply from the Authenticated Station) for a specific port or ports.
Enter set dot1x max-req, followed by a number from 1 to 10, to set the maximum
●
number of times the port tries to retransmit requests to the Authenticated Station before
the session is terminated for all ports on which 802.1x is enabled.
Enter set port dot1x max-req, followed by the module and port number (or range of
●
ports) and a number from 1 to 10, to set the maximum number of times the port tries to
retransmit requests to the Authenticated Station before the session is terminated for a
specific port or ports.
Enter set dot1x re-authperiod, followed by the length of the new re-authentication
●
period in seconds (0 to 65535) to set change the re-authentication period, which is the
interval between a port's attempts to re-authenticate the host if re-authentication is
enabled on the port.
Enter set port dot1x re-authperiod, followed by the module and port number and
●
the length of the new re-authentication period in seconds (0 to 65535) to set change the
re-authentication period for a specific port, which is the interval between the port's
attempts to re-authenticate the host if re-authentication is enabled on the port.
Enter set port dot1x server-timeout, followed by the module and port number (or
●
range of ports) and a time period in seconds (1 to 65535), to set the server timeout (the
time to wait for a reply from the Authentication Server) per port.
Use the set dot1x lldp tlv command to specify that if LLDP is enabled, then upon
●
802.1x authentication of a supplicant, the G250/G350 transmits the port LLDP information
(PVID, Port VLAN) in the LLDP packet sent to the supplicant.

Displaying 802.1x parameters

Enter show dot1x to display the system 802.1x parameters, including whether 802.1x is
●
enabled or disabled on the G250/G350 and the Supplicants' status.
Managing login permissions
Issue 5 June 2008 71