Upgrading J-Series Router Software, If Necessary; Additional Configuration That Might Be Needed - Avaya IG550 Installing And Configuring

5. At the configure prompt (#), type commit.
6. At the configure prompt (#), type show access.
The chap secret for modem access appears.
Note:
To complement the USB modem setup for remote dial-in, you must turn off IP
Note:
compression on the computer you are using to remotely access the modem. See
Administration Guide and CLI Reference for the Avaya IG550 Integrated
Gateway, 03-601883.

Upgrading J-series router software, if necessary

1. See the Juniper J4350 and J6350 Services Router Getting Started Guide, Release 8.2.

Additional configuration that might be needed

The configuration file on the Disk-on-Key might vary in the extent to which the router is
configured. The following configuration items are mandatory and will always be included in the
configuration file:
Router Gigabit Ethernet address
●
TGM550 IP address and slot number
●
vp (or TGM550) interface address, which is used for communication between the router
●
and the TGM550
Media Gateway Controller (MGC) list
●
Root user password
●
Other items that the file might also include are:
Juniper USP interfaces
●
WAN DS1
●
WAN DS3
●
Issue 1.1 May 2007 35