Preparing A G250 Without An S8300 Server; Configuring The G250 Using The Giw - Avaya G250 Quick Start For Hardware Installation

Prepare for Configuration
20. If you selected the option Use this wizard to create basic translations in the Translation
Source screen, you can configure Telephony, Trunking, and Endpoints.
21. Optionally configure alarming for the modem, OSS alarming, and SNMP alarming.
22. Optionally change the root password on the media gateway.
23. On the Authentication File screen, load the CM authentication file that you prepared from
your laptop.

Preparing a G250 without an S8300 server

You can use the Gateway Installation Wizard (GIW) to configure the Avaya G250 Media
Gateway without an S8300. You can perform the configuration on site, or prepare the G250 for
a remote configuration.
1. Install the GIW software on your laptop. You can download the GIW software from the
Avaya support Web site, at
2. Double-click the GIW icon on the laptop to open the Gateway Installation Wizard. The
Overview screen appears.
3. Click Continue. The Gateway Connection Details screen appears.
4. Select Select if this is any Gateway other than G430
a. At the prompt, enter username root and password root.
b. Change the password when prompted.
5. Click Continue. The G250 Wizard Usage Options screen appears.
6. To perform an on site configuration using the GIW, continue with
using the GIW
for a remote configuration of the G250

Configuring the G250 using the GIW

1. From the Wizard Usage Options screen, select Continue the installation using this wizard, and
click Continue.
2. On the Initialize Components screen, check the options that are appropriate for your
installation.
3. On the Import EPW screen, import the Electronic Pre-Installation Worksheet (EPW) that
was prepared.
30 Quick Start for Hardware Installation Avaya G250 Media Gateway
http://support.avaya.com/avayaiw
on page 30. To prepare for a remote configuration, continue with
on page 31.
and go to File Downloads.
Configuring the G250
Preparing