Chapter 6: Administering Communication Manager; On The Server To Support The Ig550 Integrated Gateway; Accessing Communication Manager; Administering Node Names For C-Lan Circuit Packs (8400/8500/87Xx) - Avaya IG550 Installing And Configuring

Chapter 6: Administering Communication Manager

Accessing Communication Manager

1. Log in to the Communication Manager server using SSH
2. At the Linux command line, type sat, and press Enter.
3. Log in to the sat.
Administering node names for C-LAN circuit packs (8400/8500/
87xx)
Note:
The Control-LAN (C-LAN) boards must be TN799DP running version 5 or greater
Note:
firmware. Be sure to check the firmware version for these boards on the server.
For information on how to upgrade the firmware on the S8400, S8500 or
S8700-series server, please see the "Upgrading firmware on programmable TN
circuit packs," in Upgrading, Migrating, and Converting Avaya Servers and
Gateways, 03-300412.
1 A third-party SSH client must already be installed on your computer. PuTTY is one such client available for
download from http://www.putty.nl/download.html. A version of PuTTY that is defaulted for SSH server access
is available for Avaya services personnel only. In this version, some values below have already been
pre-selected. While a variety of Avaya products support access using SSH, Avaya does not provide support for
third-party clients used for SSH access. Any problems with an SSH client, including PuTTY, are the
responsibility of the user or the SSH client vendor.
on the server to support the IG550
Integrated Gateway
1
.
Issue 2 January 2008 141