Poe Configuration Cli Commands - Avaya W310 User Manual

Chapter 13 PoE (Power over Ethernet) Features
Power will automatically be restored to PDs according to their priority when the power
budget increases. If the power budget is exceeded, power will not be provided to a new PD
when you attach it, even if you define its priority as "High" or "Critical".

PoE Configuration CLI Commands

In order to...
Enable/disable load detection and
power delivery on a port
Configure the priority level for
powering the port
Set the maximum power available from
the external power supply to power
PDs
Show the current status of the PD inline
power on all ports
230
Use the following command...
set port powerinline
set port powerinline priority
set powerinline external power
show powerinline
Avaya W310 User's Guide