Administer Multivantage Software On The S8700 (When The S8300 Is An Lsp) - Avaya G700 Installation And Upgrades

3 Configuring a New G700 with an S8300 (Primary Controller or Local Survivable Processor):
Save MultiVantage Translations
Begin
Save translations again after all MultiVantage administration is complete.
- At the SAT prompt, type save translations.
End
Administer MultiVantage Software on the
S8700 (When the S8300 Is an LSP)
!
CAUTION:
This administration applies only to an S8700 that serves as the primary controller. If the
S8300 is an LSP, do not administer MultiVantage software on it. Translations are
automatically copied to the S8300 LSP from the S8700 primary controller after a save
translations command or a data backup.
To continue administration of various features available to the S8700 Media Server with G700 Media
Gateways, you will use the SAT tools. Among many other tasks, you will use the SAT interface to:
• Provide Ethernet access to MultiVantage (this should have already been established as a part of
normal S8700 installation)
• Define the IP Network Region (this should have already been established as a part of normal S8700
installation)
• Add a Media Gateway
Note: This document covers only the administration of MultiVantage software required
for the G700 Media Gateway to communicate with the primary controller over a
customer's network. For the majority of administration required, see
''Administrator's Guide to MultiVantage Software, 555-233-506,'' or
''Administration for Network Connectivity for MultiVantage Software, 555-233-
504.''
Note: For information on installing the CLAN boards on the S8700 port networks and
complete information on installing an S8700 Media Server, see the Installation
documentation on the ''Avaya S8300 and S8700 Media Server Library CD, 555-
233-825.''
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
129