29
Adding a policy monitor
10. To set policy monitors for the Management application, complete the following steps.
11. Click OK on the Add Monitor dialog box.
12. Click Close on the Policy Monitor dialog box.
832
FIGURE 365
Add Policy Monitor dialog box, Management Checks tab
a. Select the Management Checks tab.
b. Select the Check to see if the server backup is enabled and working check box to
determine the following configurations:
•
Back up enabled for the Management application server.
•
Backup output directory is accessible and writable.
This policy only applies to scheduled backup, not manual (on demand) backup.
The new policy monitor displays in the Monitors table.
Brocade Network Advisor SAN User Manual
53-1002167-01