Configure Vlan Netlogin-Lease-Timer - Extreme Networks ExtremeWare Command Reference Manual

configure vlan netlogin-lease-timer

configure vlan <vlan name> netlogin-lease-timer <seconds>
Description
Configures the timer value returned as part of the DHCP response for clients attached to
Network Login-enabled ports.
Syntax Description
vlan name
seconds
Default
10 seconds.
Usage Guidelines
The timer value is specified in seconds.
This command applies only to the web-based authentication mode of Network Login.
Example
The following command sets the timer value to 15 seconds for VLAN corp:
configure vlan corp netlogin-lease-timer 15
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the VLAN to which this timer value applies.
Specifies the timer value, in seconds.
configure vlan netlogin-lease-timer
847