Unconfigure Msm-Failover - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Configuring Slots and Ports on a Switch

unconfigure msm-failover

Disables hitless failover.

This command is available only on the BlackDiamond switches.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

The following occurs after you execute this command:

• The external ports are reset when an MSM failover occurs

• No state is preserved when a failover occurs

• The MSM failover timeout returns to 60 seconds

• The new master uses the configuration file kept in its flash memory upon failover

The following command disables hitless failover and returns factory defaults:

unconfigure msm-failover

This command was first available in ExtremeWare 7.1.1.

Platform Availability

This command is available on BlackDiamond switches only.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7