Dot1X Guest-Vlan - HP 6125G Command Reference Manual

Default level
2: System level
Parameters
string: Specifies a set of 1 to 16 domain name delimiters for 802.1X users. No space is required between
delimiters. Available delimiters include the at sign (@), backslash (/), and forward slash (\).
Description
Use dot1x domain-delimiter to specify a set of domain name delimiters supported by the access device.
Any character in the configured set can be used as the domain name delimiter for 802.1X authentication
users.
Use undo dot1x domain-delimiter to restore the default.
By default, the access device supports only the at sign (@) delimiter for 802.1X users.
The delimiter set you configured overrides the default setting. If @ is not included in the delimiter set, the
access device will not support the 802.1X users that use @ as the domain name delimiter.
If a username string contains multiple configured delimiters, the leftmost delimiter is the domain name
delimiter. For example, if you configure @, /, and \ as delimiters, the domain name delimiter for the
username string 123/22\@abc is the forward slash (/).
The cut connection user-name user-name and display connection user-name user-name commands are
not available for 802.1X users that use / or \ as the domain name delimiter. For more information about
the two commands, see
Examples
# Specify the characters @, /, and \ as domain name delimiters.
<Sysname> system-view
[Sysname] dot1x domain-delimiter @\/

dot1x guest-vlan

Syntax
In system view:
dot1x guest-vlan guest-vlan-id [ interface interface-list ]
undo dot1x guest-vlan [ interface interface-list ]
In Ethernet interface view:
dot1x guest-vlan guest-vlan-id
undo dot1x guest-vlan
View
System view, Ethernet interface view
Default level
2: System level
Parameters
guest-vlan-id: Specifies the ID of the VLAN to be specified as the 802.1X guest VLAN, in the range of 1
to 4094. Make sure that the VLAN has been created.
"AAA configuration commands."
99