Click Clear All Entries to remove all Host Name IP Mapping entries from the table.
Viewing Dynamic Host Entries Using CLI Commands
For information about the CLI commands that perform this function, see the IP Addressing Commands
CLI Reference Guide
chapter in the
use.
Table 6-19. Dynamic Host Entries Commands
CLI Command
show hosts
ARP Table
Use the ARP Table page to view ARP parameters for IP interfaces. The ARP table displays the correlation
between each MAC address and its corresponding IP address.
To display the ARP Table page, click System → IP Addressing → ARP in the tree view.
Figure 6-30. ARP Table
The ARP Table page contains the following fields:
•
IP Address — The station IP address, which is associated with the MAC address filled in below.
•
MAC Address — The station MAC address, which is associated in the ARP table with the IP address.
Viewing the ARP Table Using CLI Commands
For information about the CLI commands that perform this function, see the IP Addressing Commands
CLI Reference Guide
chapter in the
use.
Table 6-20. ARP Table Commands
CLI Command
show arp switch
. The following table summarizes the equivalent CLI commands you
Description
Displays dynamic host entries that the switch has learned.
. The following table summarizes the equivalent CLI commands you
Description
Use to display the entries in the ARP table.
Configuring System Information
137