Figure 7-59. MAC - VLAN Bind Table
Modifying VLAN for Multiple MAC Addresses
1. Open the Bind MAC to VLAN page.
2. Click Show All.
The MAC - VLAN Bind Table displays.
3. Click Edit for each MAC Address with a VLAN to modify.
4. Edit the Bind to VLAN fields.
5. Click Apply Changes.
The MAC to VLAN settings are modified, and the device is updated.
Removing a MAC - VLAN Entry
1. Open the Bind MAC to VLAN page.
2. Click Show All.
The MAC - VLAN Bind Table displays.
3. Check Remove for each entry to remove.
4. Click Apply Changes.
The entry/entries are removed, and the device is updated.
Binding a MAC to a VLAN Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
•
VLAN Commands
The following table summarizes the equivalent CLI commands for this feature.
Configuring Switching Information
353