Dell PowerConnect 8024 User Manual page 264

Figure 6-131. iSCSI Sessions
The iSCSI Sessions page contain the following fields:
Target Name — Identifies the name of the iSCSI target.
Initiator Name — Identifies the name of the iSCSI initiator.
iSCSI Identifiers— Identifies the Initiator Defined Session Identifier (ISID) value.
Configuring iSCSI Optimization Using CLI Commands
For information about the CLI commands that perform this function, see the iSCSI Commands chapter
CLI Reference Guide
in the
The following table summarizes the equivalent CLI commands you use to configure iSCSI.
Table 6-66. iSCSI Optimization Interface Commands
CLI Command
iscsi enable
iscsi target port
iscsi cos
iscsi aging time
cut-through
show iscsi
show iscsi sessions
264
Configuring System Information
:
Description
Globally enables iSCSI awareness.
Configures an iSCSI target port and, optionally, address and name.
Sets the quality of service profile that will be applied to iSCSI flows.
Sets aging time for iSCSI sessions.
Enables Alternate Store and Forward (ASF) mode.
Displays iSCSI settings.
Displays iSCSI session information.