Sender IP Address — To create a new rule for the selected ARP ACL, enter in this field the Sender IP
•
Address match value for the ARP ACL.
Sender MAC Address — To create a new rule for the selected ARP ACL, enter in this field the Sender
•
MAC Address match value for the ARP ACL.
Displaying the DAI ACL Rule Summary Table
1. Open the DAI ACL Rule Configuration page.
2. Click Show All.
The Dynamic ARP Inspection ACL Rule Summary table displays.
Figure 7-112. Dynamic ARP Inspection Rule Summary
Configuring Dynamic ARP Inspection Rule With CLI Commands
For information about the CLI commands that perform this function, refer to the following chapter in
CLI Reference Guide
the
•
Dynamic ARP Inspection Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-62. Dynamic ARP Inspection Rule Command
CLI Command
permit ip host mac host
DAI Statistics
Use the DAI Statistics page to display the statistics per VLAN.
To display the DAI Statistics page, click Switching → Dynamic ARP Inspection → Statistics in the
navigation tree.
:
Description
Configures a rule for a valid IP address and MAC address combination
used in ARP packet validation.
Configuring Switching Information
427