Interface Configuration - Dell PowerConnect 8024 User Manual

Table 6-63. ISDP Cache Commands
CLI Command
clear isdp table
show isdp entry
show isdp neighbors

Interface Configuration

From the ISDP Interface Configuration page, you can configure the ISDP settings for each interface.
If ISDP is enabled on an interface, it must also be enabled globally in order for the interface to transmit
ISDP packets. If the ISDP mode on the ISDP Global Configuration page is disabled, the interface will
not transmit ISDP packets, regardless of the mode configured on the interface.
To access the ISDP Interface Configuration page, click System → ISDP → Interface Configuration in
the navigation tree.
Figure 6-125. ISDP Interface Configuration
The ISDP Interface Configuration page contain the following fields:
Interface — Select the interface with the ISDP mode status to configure or view.
•
Description
Clears entries in the ISDP table.
Displays ISDP entries.
Displays the list of neighboring devices.
Configuring System Information
257