Figure 7-26. LAG Configuration Table
Editing LAG Parameters
1. Open the LAG Configuration page.
2. Click Show All.
3. The LAG Configuration Table displays.
4. Check Edit for all LAGs to be modified.
5. Admin Status and Description can now be edited as needed.
6. Click Apply Changes.
The LAG parameters are saved to the switch.
Configuring LAGs with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
Port Channel Commands
The following table summarizes the equivalent CLI commands for this feature.
306
Configuring Switching Information
: