Dell PowerConnect 8024 User Manual page 254

Figure 6-123. ISDP Global Configuration
The ISDP Global Configuration page contain the following fields:
• ISDP Mode — Use this field to enable or disable the Industry Standard Discovery Protocol on the
switch.
• ISDP V2 Mode — Use this field to enable or disable the Industry Standard Discovery Protocol v2 on
the switch.
• Message Interval — Specifies the ISDP transmit interval. The range is (5–254). Default value is 30
seconds.
Hold Time Interval — The receiving device holds ISDP message during this time period. The range is
•
(10–255). Default value is 180 seconds.
• Neighbors Table Last Time Changed — Indicates when the Neighbors table entry was last modified.
• Device ID — The Device ID advertised by this device. The format of this Device ID is characterized
by the value of Device ID Format object.
• Device ID Format Capability — Indicates the Device ID format capability of the device.
– serialNumber — Indicates that the device uses serial number as the format for its Device ID.
– macAddress — Indicates that the device uses layer 2 MAC address as the format for its Device ID.
– other — Indicates that the device uses its platform specific format as the format for its Device ID.
• Device ID Format — Indicates the Device ID format of the device.
– serialNumber — Indicates that the value is in the form of an ASCII string containing the device
serial number.
254
Configuring System Information