Vlan Id — Specifies the VLAN ID associated with a particular policy type.
–
–
Priority — Specifies the priority associated with a particular policy type.
–
DSCP — Specifies the DSCP associated with a particular policy type.
–
Unknown Bit Status — Specifies the unknown bit associated with a particular policy type.
–
Tagged Bit Status — Specifies the tagged bit associated with a particular policy type.
•
Inventory — If an inventory TLV is present in LLDP frames, the following information displays:
Hardware Revisions — Specifies hardware version.
–
–
Firmware Revisions — Specifies Firmware version.
–
Software Revisions — Specifies Software version.
–
Serial Number — Specifies serial number.
Manufacturer Name — Specifies manufacturers name.
–
–
Model Name — Specifies model name.
–
Asset ID — Specifies asset id.
•
Location Information — If a location TLV is present in LLDP frames, the following information
displays:
–
Sub Type — Specifies type of location information.
–
Location Information — Specifies the location information as a string for given type of location
id.
•
Extended PoE — If the local device is a PoE device, the following information displays:
–
Device Type — Specifies power device type.
•
Extended PoE PSE — If an extended PSE TLV is present in LLDP frame, the following information
displays:
–
Available — Specifies available power sourcing equipment's power value in tenths of watts on the
port of local device.
–
Source — Specifies power source of this port.
–
Priority — Specifies PSE port power priority.
•
Extended PoE PD — If an extended PD TLV is present in LLDP frame, the following information
displays:
–
Required — Specifies required power device power value in tenths of watts on the port of local
device.
–
Source — Specifies power source of this port.
–
Priority — Specifies PD port power priority.
Configuring Switching Information
413