Dell PowerConnect 8024 User Manual page 360

Use the GVRP Global Parameters page to enable GVRP globally. You can also enable GVRP on a per-
interface basis.
To display the GVRP Global Parameters page, click Switching → VLAN → GVRP Parameters in the tree
view.
Figure 7-65. GVRP Global Parameters
The GVRP Global Parameters page contains the following fields:
• GVRP Global Status — Enables or disables GVRP on the switch. GVRP is disabled by default.
• Interface — Specifies the Unit and Port or LAG for which GVRP is enabled.
• GVRP State — Enables or disables GVRP on the specified interface.
• Dynamic VLAN Creation — Enables or disables VLAN creation through GVRP.
• GVRP Registration — Enables or disables GVRP Registration.
Enabling GVRP On the Switch
1. Open the GVRP Global Parameters page.
2. Select Enable in the GVRP Global Status field.
3. Click Apply Changes.
GVRP is enabled on the switch.
Enabling VLAN Registration Through GVRP
1. Open the GVRP Global Parameters page.
360
Configuring Switching Information