The delegated prefix and parameters are saved, and the device is updated.
Configuring a delegated prefix Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
•
DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-8. DHCPv6 Prefix Delegation Command
CLI Command
prefix-delegation
DHCPv6 Pool Summary
Use the Pool Summary page to display settings for all DHCPv6 Pools. At least one pool must be created
using DHCPv6 Pool Configuration before the Pool Summary displays.
To display the page, click IPv6 → DHCPv6 → Pool Summary in the tree view.
Figure 10-9. Pool Summary
The Pool Summary page contains the following fields:
•
Pool Name — Selects the pool to display.
616
Configuring IPv6
:
Description
Defines Multiple IPv6 prefixes within a pool for distributing to specific
DHCPv6 Prefix delegation clients.