Dell PowerConnect 8024 User Manual page 192

2. Select the Remove option at the bottom of the page.
3. Click Apply Changes to remove the user.
Adding a Local User
1. Open the Local User page.
2. Click Add.
The Add Local User page displays:
Figure 6-72. Add Local User
3. Enter a name for the new user. The name is 1 to 31 alphanumeric characters.
4. Enter a password for the new user. The password is 8-64 characters in length.
5. Click Apply Changes.
The local user is added, and the device is updated.
If no user is added, a No User Exists message is shown in the web page instead of the empty controls.
Displaying the Local User Summary Page
1. Open the Local User page.
2. Click Show All.
The CP Local User Summary page displays:
Figure 6-73. CP Local User Summary
3. To remove a configured user, select the Remove option in the appropriate row, and then click Apply
Changes.
192
Configuring System Information