Dell PowerConnect 8024 User Manual page 717

Interface Mode — Displays the administrative mode of the selected DVMRP routing interface, either
•
Enable or Disable.
Protocol State — Displays the operational state of the DVMRP protocol on the selected interface,
•
either Operational or Non-operational.
• Local Address — Displays the IP address used as a source address in packets sent from the selected
interface.
• Interface Metric — Displays the metric used to calculate distance vectors for the selected interface.
Interface Statistics
• Generation ID — Displays the DVMRP generation ID used by the router for the selected interface.
This value is reset every time an interface is (re)started and is placed in prune messages. A change in
generation ID informs the neighbor routers that any previous information about this router should be
discarded.
• Received Bad Packets — The number of invalid packets received on the selected interface.
• Received Bad Routes — The number of invalid routes received on the selected interface.
• Sent Routes — The number of routes sent on the selected interface.
Neighbor Parameters
• Neighbor IP — The IP address of the neighbor whose information is displayed.
• State — The state of the specified neighbor router on the selected interface, either active or down.
• Neighbor Uptime — The DVMRP uptime for the specified neighbor on the selected interface. This is
the time since the neighbor entry was learned.
Neighbor Expiry Time — The DVMRP expiry time for the specified neighbor on the selected
•
interface. This is the time left before this neighbor entry ages out, and is not applicable if the neighbor
router's state is down.
• Generation ID — The DVMRP generation ID for the specified neighbor on the selected interface.
• Major Version — The DVMRP Major Version for the specified neighbor on the selected interface.
• Minor Version — The DVMRP Minor Version for the specified neighbor on the selected interface.
Capabilities — The DVMRP capabilities of the specified neighbor on the selected interface.
•
• Received Routes — The number of routes received for the specified neighbor on the selected
interface.
Received Bad Packets — The number of invalid packets received for the specified neighbor on the
•
selected interface.
• Received Bad Routes — The number of invalid routes received for the specified neighbor on the
selected interface.
Configuring IP Multicast
717