Table 11-5. Policy Class Configuration Commands
CLI Command
match protocol
match source-address mac
match srcip
match srcip6
match srcl4port
match vlan
mirror
police-simple
redirect
show class-map
(continued)
Description
Adds to the specified class definition a match condition based on the
value of the IP Protocol field in a packet using a single keyword
notation or a numeric value notation.
Adds to the specified class definition a match condition based on the
source MAC address of the packet.
Adds to the specified class definition a match condition based on the
source IP address of a packet.
Adds to the specified class definition a match condition based on the
source IPv6 address of a packet.
Adds to the specified class definition a match condition based on the
source layer 4 port of a packet using a single keyword, a numeric
notation, or a numeric range notation.
Adds to the specified class definition a match condition based on the
value of the layer 2 VLAN Identifier field.
Mirrors all the data that matches the class defined to the destination
port specified
Establishes the traffic policing style for the specified class.
Specifies that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
Displays all configuration information for the specified class.
Configuring Quality of Service
683