4. Click Apply Changes.
The selected route redistribution is configured for OSPFv3, and the device is updated.
Configuring OSPFv3 Route Redistribution Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
•
OSPFv3 Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 10-24. OSPFv3 Route Redistribution Commands
CLI Command
redistribute
distribute-list out
OSPFv3 Route Redistribution Summary
Use the OSPFv3 Route Redistribution Summary page to display route redistribution settings by source.
To display the page, click IPv6 → OSPFv3 → Route Redistribution Summary in the tree view.
Description
Configures the OSPFv3 protocol to allow redistribution of routes from
the specified source protocol/routers.
Specifies the access list to filter routes received from the source
protocol.
655
Configuring IPv6