Dell PowerConnect 8024 User Manual page 221

Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap recipients.
•
– Excluded — Restricts sending OID traps or informs.
– Included — Sends OID traps or informs.
Adding SNMP Filters
1. Open the Notification Filter page.
2. Click Add.
The Add Filter page displays:
Figure 6-101. Add Filter
3. Define the relevant fields.
4. Click Apply Changes.
The new filter is added, and the device is updated.
Displaying the Filter Table
1. Open the Notification Filter page.
2. Click Show All.
The Filter Table page appears, which displays all of the filters configured for the selected filter name:
Figure 6-102. Show Notification
Configuring System Information
221