•
System Management Commands
•
SNMP Commands
•
Clock Commands
The following table summarizes the equivalent CLI commands you use to configure device information.
Table 6-1. Device Configuration Commands
CLI Command
asset-tag
banner motd
banner motd acknowledge
set description
show boot-version
show system
show system ID
snmp-server contact
snmp-server location
System Health
Use the Health page to view physical device information, including information about the switch's
power and ventilation sources.
To display the Health page, click System → General → Health in the tree view.
104
Configuring System Information
Description
Use to specify the switch asset tag.
Controls the display of message-of-the-day banners.
Use to require that a banner be acknowledged by the user.
Use to associate a text description with a switch in the stack.
Use to display the boot image version details.
Use to display system information.
Use to display the system identity information.
Sets up a system contact (sysContact) string.
Sets the system location string.