User Group - Dell PowerConnect 8024 User Manual

Configuring Users in a Remote RADIUS Server
You can use a remote RADIUS server client authorization. You must add all users to the RADIUS server.
The local database does not share any information with the remote RADIUS database.
The following table indicates the RADIUS attributes you use to configure authorized captive portal
clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs are
denoted in the Attribute column and are comma delimited (vendor id, attribute id).
Table 6-39. Captive Portal User RADIUS Attributes
Attribute Number
User-Name 1
User-Password 2
Session-Timeout 27
Idle-Timeout 28

User Group

You can assign Local Users to User Groups that you create. If the Verification Mode is Local or RADIUS,
you assign a User Group to a CP Configuration. All users who belong to the group are permitted to
access the network through this portal. The User Group list is the same for all CP configurations on the
switch.
To view and configure User Groups, click System → Captive Portal → User Group.
Description
User name to be authorized
User password
Logout once session timeout is
reached (seconds). If the
attribute is 0 or not present then
use the value configured for the
captive portal.
Logout once idle timeout is
reached (seconds). If the
attribute is 0 or not present then
use the value configured for the
captive portal.
Range Usage
1-32 characters Required
8-64 characters Required
Integer (seconds) Optional
Integer (seconds) Optional
Configuring System Information
Default
None
None
0
0
193