Dell PowerConnect 8024 User Manual page 721

Figure 12-13. Route Summary
The Route Summary page displays the following fields:
• Source Address - The network address that is combined with the source mask to identify the sources
for this entry.
• Source Mask — The subnet mask to be combined with the source address to identify the sources for
this entry.
• Upstream Neighbor — The address of the upstream neighbor (for example, RPF neighbor) from
which IP datagrams from these sources are received.
• Interface — The interface on which IP datagrams sent by these sources are received. A value of 0
typically means the route is an aggregate for which no next-hop interface exists.
• Metric — The distance in hops to the source subnet.
• Expiry Time — The minimum amount of time remaining before this entry is aged out.
• Up Time — The time since the route represented by this entry was learned by the router.
Displaying the DVMRP Route Summary Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• DVMRP Commands
The following table summarizes the equivalent CLI commands for this feature.
Configuring IP Multicast
721