Capability Information — Specifies the supported and enabled capabilities that was received in MED
•
TLV on this port.
Supported Capabilities — Specifies supported capabilities that was received in MED TLV on this
–
port.
–
Enabled Capabilities — Specifies enabled capabilities that was received in MED TLV on this
port.
–
Device Class — Specifies device class as advertised by the device remotely connected to the port.
•
Network Policy Information —If a network policy TLV is received in the LLDP frames on this port,
the following information displays:
–
Network Application — Specifies the type of media application that the local device advertises in
the policy. A port may receive one or more application types, which include the following types:
•
unknown
•
voicesignaling
•
guestvoice
•
guestvoicesignalling
•
softphonevoice
•
videoconferencing
•
streammingvideo
•
videosignalling
–
Vlan Id — Specifies the VLAN ID associated with a particular policy type.
–
Priority — Specifies the priority associated with a particular policy type.
–
DSCP — Specifies the DSCP associated with a particular policy type.
–
Unknown Bit Status — Specifies the unknown bit associated with a particular policy type.
–
Tagged Bit Status — Specifies the tagged bit associated with a particular policy type.
•
Inventory — If an inventory TLV is present in LLDP frames, the following information displays:
Hardware Revisions — Specifies the hardware version of the remote device.
–
–
Firmware Revisions — Specifies the firmware version of the remote device.
–
Software Revisions — Specifies the software version of the remote device.
–
Serial Number — Specifies the serial number of the remote device.
–
Manufacturer Name — Specifies the manufacturer's name of the remote device.
–
Model Name — Specifies the model name of the remote device.
–
Asset ID — Specifies the asset ID of the remote device.
Location Information — If a location TLV is present in LLDP frames, the following information
•
displays:
Configuring Switching Information
415