Dell PowerConnect 8024 User Manual page 166

Figure 6-53. TACACS+ Servers Table
Removing a TACACS+ Server from the TACACS+ Servers List
1. Open the TACACS+ Settings page.
2. Click Show All.
The TACACS+ Servers Table opens.
3. Select a TACACS+ Servers Table entry.
4. Select the Remove check box.
5. Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Configuring TACACS+ Servers Using CLI Commands
For information about the CLI commands that perform this function, see the TACACS+ Commands
CLI Reference Guide
chapter in the
use.
Table 6-30. TACACS+ Servers Commands
CLI Command
key
port
priority
show tacacs
tacacs-server host
tacacs-server key
tacacs-server timeout
timeout
166
Configuring System Information
. The following table summarizes the equivalent CLI commands you
Description
Specifies the authentication and encryption key for all TACACS
communications between the device and the TACACS server.
Specifies a server port number.
Specifies the order in which servers are used.
Displays TACACS+ server settings and statistics.
Specifies a TACACS+ server host.
Sets the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon.
Sets the interval for which the switch waits for a server host to reply.
Specifies the timeout value in seconds.