Dell PowerConnect 8024 User Manual page 453

Transmitted PFC Frames — Displays the total number of PFC frames that have been received by the
•
selected interface.
Priority — Displays the priority value of which the PFC statistics of the selected interface are being
•
shown.
• Received PFC Frames (per Priority) — Displays the number of PFC frames that have been received
by this interface for this priority.
Configuring PFC Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• Datacenter-bridging Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-76. Priority-based Flow Control Commands
CLI Command
datacenter-bridging
priority-flow-control mode on
priority-flow-control priority
show interfaces datacenter-bridging
clear priority-flow-control statistics
Description
Enters the DataCenterBridging mode for an ethernet or port-channel
interface.
Enables PFC on an interface.
Enables the priority group for lossless behavior (PFC enabled).
Displays the datacenter-bridging configuration, status and counters for
a given interface.
Clears all or interface Priority-Flow-Control statistics.
Configuring Switching Information
453