Lldp Statistics - Dell PowerConnect 8024 User Manual

Modifying LLDP Interface Settings for Multiple Ports
1. Open the LLDP Configuration page.
2. Click Show All.
The LLDP Interface Settings Table displays.
3. Click Edit for each Unit/Port to modify.
4. Edit the LLDP Interface fields as needed.
5. Click Apply Changes.
The LLDP Interface settings are modified, and the device is updated.
Configuring LLDP with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 7-50. LLDP Commands
CLI Command
lldp notification
lldp notification-interval
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
lldp transmit-tlv
show lldp

LLDP Statistics

Use the LLDP Statistics page to view LLPD-related statistics.
To display the LLDP Statistics page, click Switching → LLDP → LLDP Statistics in the tree view.
402
Configuring Switching Information
:
Description
Enables remote data change notifications.
Limits how frequently remote data change notifications are sent.
Enables the LLDP receive capability.
Sets the timing parameters for local data transmission on ports enabled
for LLDP .
Enables the LLDP advertise capability.
Specifies that transmission of the local system management address
information in the LLDPDUs is included.
Specifies which optional TLVs in the 802.1AB basic management set
will be transmitted in the LLDPDUs.
Displays the current LLDP configuration summary.