Table 9-7. OSPF Area Configuration Commands
CLI Command
area default-cost
area nssa
area nssa default-info-originate
area nssa no-redistribute
area nssa no-summary
area nssa translator-role
area nssa translator-stab-intv
area stub
area stub no-summary
show ip ospf area
show ip ospf range
Description
Configures the monetary default cost for the stub area.
Configures the specified area ID to function as an NSSA.
Configures the metric value and type for the default route advertised
into the NSSA.
Configures the NSSA Area Border router (ABR) so that learned
external routes are not redistributed to the NSSA.
Configures the NSSA so that summary LSAs are not advertised into
the NSSA.
Configures the translator role of the NSSA.
Configures the translator stability interval of the NSSA.
Creates a stub area for the specified area ID.
Prevents Summary LSAs from being advertised into the NSSA.
Displays information about the identified OSPF area.
Displays information about the area ranges for the specified area-id.
Configuring Routing
507