Pim Global Status - Dell PowerConnect 8024 User Manual

The following table summarizes the equivalent CLI commands for this feature.
Table 12-32. PIM Global Configuration Commands
CLI Command
ip pimdm
ip pimsm

PIM Global Status

Use the PIM Global Status page to view the administrative status of PIM-DM or PIM-SM on the
switch.
To display the page, click IPv4 Multicast → PIM → Global Status or IPv6 Multicast → PIM → Global
Status in the tree view.
Figure 12-34. PIM Global Status
The PIM Global Status page contains the following fields:
• PIM Protocol — Select PIM-DM or PIM-SM. Only one PIM protocol can be enabled on the switch at
a time. If you select PIM-SM, additional fields appear.
• Admin Mode — Displays the administrative status of the selected PIM protocol on the system.
• Data Threshold Rate — If PIM-SM is selected as the protocol, shows the minimum source data rate in
Kbps above which the last-hop router switches to a source-specific shortest path tree.
Register Threshold Rate — If PIM-SM is selected as the protocol, shows the minimum source data
•
rate in Kbps above which the Rendezvous Point router switches to a source-specific shortest path tree.
758
Configuring IP Multicast
Description
Enables the administrative mode of PIM-DM in the router.
Enables the administrative mode of PIM-SM in the router.