Area Range Configuration - Dell PowerConnect 8024 User Manual

Area Range Configuration

Use the OSPF Area Range Configuration page to configure and display an area range for a specified
NSSA.
To display the page, click Routing → OSPF → Area Range Configuration in the tree view.
Figure 9-9. OSPF Area Range Configuration
The OSPF Area Range Configuration page contains the following fields:
• Area ID — Select the area for which data is to be configured from the drop-down menu.
• IP Address — Enter the IP Address for the address range for the selected area.
• Subnet Mask — Enter the Subnet Mask for the address range for the selected area.
• LSDB Type — Select the type of Link Advertisement associated with the specified area and address
range. The default type is 'Network Summary.'
• Advertisement — Select Enable or Disable from the drop-down menu. If you selected Enable the
address range is advertised outside the area through a Network Summary LSA. The default is Enable.
Add — Check the Add check box if you wish to add an area range.
•
OSPF Area Range Table
• Area ID — Displays the OSPF area.
• IP Address — Displays the IP address of an address range for the area.
Subnet Mask — Displays the subnet mask of an address range for the area.
•
• LSDB Type — Displays the link advertisement type for the address range and area.
• Advertisement — Displays the advertisement mode for the address range and area.
• Remove — Removes the specified area entry.
Defining an OSPF Area Range
1. Open the OSPF Area Range Configuration page.
Configuring Routing
509