Dell PowerConnect 8024 User Manual page 135

Adding Host Domain Names
1. Open the Host Name Mapping page.
2. Click Add.
The Add Static Host Name Mapping page displays:
Figure 6-27. Add Static Host Name Mapping
3. Define the relevant fields.
4. Click Apply Changes.
The IP address is mapped to the host name, and the device is updated.
Displaying the Static Host Name Mapping Table
1. Open the Host Name Mapping page.
2. Click Show All.
The Static Host Name Mapping Table displays:
Figure 6-28. Static Host Name Mapping Table
Removing a Host Name From IP Address Mapping
1. Open the Host Name Mapping page.
2. Click Show All.
The Host Name Mapping Table opens.
Configuring System Information
135