Dell PowerConnect 8024 User Manual page 727

IGMP Configuration Summary
Use the IGMP Configuration Summary page to display IGMP routing parameters and data. You must
configure at least one IGMP router interface to access this page.
To display the page, click IPv4 Multicast → IGMP → Routing Interface → Configuration Summary in
the tree view.
Figure 12-16. IGMP Configuration Summary
The IGMP Configuration Summary page displays the following fields:
• Interface — Select the interface for which data is to be displayed.
Interface Parameters
• Interface Mode — The administrative status of IGMP on the selected interface.
• IP Address — The IP address of the selected interface.
Subnet Mask — The subnet mask for the IP address of the selected interface.
•
• Protocol State — The operational state of IGMP on the selected interface.
• Version — The version of IGMP configured on the selected interface.
• Query Interval (secs) — The frequency at which IGMP host-query packets are transmitted on the
selected interface.
• Query Max Response Time (1/10 of a second) — The maximum query response time advertised in
IGMPv2 queries sent from the selected interface.
Configuring IP Multicast
727