The following table summarizes the equivalent CLI commands for this feature.
Table 9-17. OSPF Route Redistribution Configuration Commands
CLI Command
redistribute
distribute-list out
Route Redistribution Summary
Use the OSPF Route Redistribution Summary page to display OSPF Route Redistribution
configurations.
To display the page, click Routing → OSPF → Route Redistribution Summary in the tree view.
Figure 9-20. OSPF Route Redistribution Summary
The OSPF Route Redistribution Summary page contains the following fields:
•
Source — The Source Route to be redistributed by OSPF.
•
Redistribute — Specify whether to allow the routes learned through this protocol to be redistributed.
•
Metric — The Metric of redistributed routes for the given Source Route. Displays 0 when not
configured.
•
Metric Type — The OSPF metric type of redistributed routes.
•
Tag — The tag field in routes redistributed. This field displays the tag value if the source was
preconfigured, otherwise 0 is displayed.
•
Subnets — Specify whether the subnetted routes should be redistributed (Enable) or not (Disable).
Description
Configures OSPF protocol to allow redistribution of routes from the
specified source protocol/routers.
Specifies the access list to filter routes received from the source
protocol.
Configuring Routing
535