Configured Routes - Dell PowerConnect 8024 User Manual

Static — Enter values for Network Address, Subnet Mask, Next Hop IP Address, and Preference.
Figure 9-38. Route Entry Configuration - Add Static Route Type
4. Click Apply Changes.
The new route is added, and you are redirected to the Configured Routes page.
Adding a Router Route Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• IP Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-33. Router Route Configuration Commands
CLI Command
ip route
ip route default

Configured Routes

Use the Configured Routes page to display the routes that have been configured.
To display the page, click Routing → Router → Configured Routes in the tree view.
Description
Configures a static route. Use the no form of the command to delete
the static route.
Configures the default route. Use the no form of the command to
delete the default route.
Configuring Routing
565