Authorization Network RADIUS
In some networks, the RADIUS server is responsible for assigning traffic to a particular VLAN. From the
Authorization Network RADIUS page, you can enable the switch to accept VLAN assignment by the
RADIUS server.
To display the Authorization Network RADIUS page, click System Management → Security →
Authorization Network RADIUS in the tree view.
Figure 6-63. Authorization Network RADIUS
The Authorization Network RADIUS page contains the following field:
Admin Mode— Enables or disables the ability of the switch to accept VLAN assignment from the
•
RADIUS server.
Enabling VLAN Assignments by the RADIUS Server Using CLI Commands
For information about the CLI commands that perform this function, see the RADIUS Commands
CLI Reference Guide
chapter in the
use.
Table 6-36. RADIUS Network Authorization Command
CLI Command
aaa authorization network default radius
. The following table summarizes the equivalent CLI commands you
Description
Enables the switch to accept VLAN assignment by the RADIUS server.
Configuring System Information
179