2. Click Add.
The Add RADIUS Accounting Server page displays.
Figure 6-59. Add RADIUS Accounting Server
3. Enter an IP address and name for the RADIUS accounting server to add.
4. Click Apply Changes.
The new RADIUS server is added, and the device is updated.
Viewing RADIUS Accounting Server Status and Removing a Accounting Named Server
1. Open the RADIUS Accounting Server Configuration page.
2. Click Show All.
The RADIUS Named Accounting Server Status page displays.
Figure 6-60. RADIUS Accounting Server Status
3. To remove a named accounting server, select the check box in the Remove column.
4. Click Apply Changes.
The RADIUS accounting server is removed from the list.
Configuring RADIUS Accounting Server Settings Using CLI Commands
For information about the CLI commands that perform this function, see the RADIUS Commands
CLI Reference Guide
chapter in the
use.
174
Configuring System Information
. The following table summarizes the equivalent CLI commands you