Mld Routing Interface Cache Information - Dell PowerConnect 8024 User Manual

User's guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

The following table summarizes the equivalent CLI commands for this feature.
Table 12-25. IPv6 MLD Interface Summary Commands
CLI Command
show ipv6 mld interface

MLD Routing Interface Cache Information

The MLD Routing Interface Cache Information page displays cache parameters and data for an IP
multicast group address that has been reported to operational MLD routing interfaces. You must
configure at least one MLD router interface to access this page. Also, group membership reports must
have been received on the selected interface in order for data to be displayed here. To access this page,
click IPv6 Multicast → MLD → Routing Interface → Cache Information in the navigation tree.
Figure 12-26. MLD Routing Interface Cache Information
The MLD Routing Interface Cache Information page contains the following fields:
Multicast Group IP — Select the IP multicast group address for which data is to be displayed. Only if
group membership reports have been received on the selected interface can you make this selection,
and the data on this page displays.
Interface — Select the MLD routing interface for which data is displayed.
Last Reporter — The IP Address of the source of the last membership report received for this IP
Multicast group address on the selected interface.
Up Time — The time elapsed in hours:minutes:seconds since this entry was created.
Description
Displays MLD related information for an interface.
Configuring IP Multicast
745

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 8024f

Table of Contents