Dell PowerConnect 8024 User Manual page 381

The IGMP Snooping Table displays.
3. Click Edit for each Port, LAG, or VLAN to modify.
4. Edit the IGMP Snooping fields as needed.
5. Click Apply Changes.
The IGMP Snooping settings are modified, and the device is updated.
Copying IGMP Snooping Settings to Multiple Ports, LAGs, or VLANs
1. Open the General IGMP snooping page.
2. Click Show All.
The IGMP Snooping Table displays.
3. Click Copy Parameters From.
4. Select a Unit/Port, LAG, or VLAN to use as the source of the desired parameters.
5. Click Copy To for the Unit/Ports, LAGs, or VLANs that these parameters will be copied to.
6. Click Apply Changes.
The IGMP Snooping settings are modified, and the device is updated.
Configuring General IGMP Snooping Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Snooping Commands
The following table summarizes the equivalent CLI commands for this feature.
Configuring Switching Information
381